Apprenticeship Training Opportunities

Dormac is, and has been for several years, an industry leader in the training and qualification of apprentices and has received several accolades in this regard. The Company invites applications from interested employees’ children and/or relatives to apply for the following apprenticeship training opportunities:

DURBAN
4 x Fitters
4 x Turners
10 x Welders
8 x Boilermakers
1 x Electrician

CAPE TOWN
2 x Electrician
4 x Welders
4 x Boilermakers

It is important to be aware of the following:

– The Company reserves the right to revise the amount of trainees per discipline
– An application does not warrant a placement on the Dormac training programme
– Shortlisted applicants will be required to undergo psychometric- and aptitude tests
– Applicants have to meet the minimum criteria – no exceptions will be made

MINIMUM CRITERIA
– Between 18 and 23 years of age
– Matric with English, Maths & Science and at least two other subjects or a four-subject National Technical Certificate, Part 2 (N2)

Disabilities to a limited extend will be accepted, ie the applicant will have to be able to perform the duties and functions of the relevant trade

The closing date for applications is 31 March 2016.

294 Comments

KHUMBULANI

HI,I AM A 24YEARS OLD MALE,I’M LOOKING FOR AN APPRENTICESHIP ,INSERVICE TRAINING OR LEARNERSHIP. I HAVE COMPLITED MY MECHANICAL ENGENEERING STUDIES N2-N6…I’M LOOKING FOWARD TO DORMAC TO BECOME A VALUABLE ASSET.PLEASE HELP ME WITH GAINING EXPIRIENCE TO COMPLETE MY N.DIPLOMA

Reply
Aluncedo

Hi i’m Aluncedo can you please help me i’ve completed my electrical engineering N2-N4..where can i apply ?

Reply
Sibusiso

Hi my name is Sibusiso Madela, ive completed my N2 in boilermaking and currently doing my apprenticeship at PetroSA Mossel Bay. Ill be completing all the necessary modules this and i then get to do my on-site training next year. I am fully funded/paid by a funder but need to be in cape town to finish my National Diploma at CPUT in Operations Management and at the same time be doing my on-site training at a company ill be getting the necessary skills to pass my trade test in early 2019. Is there any way i could do my on-site training and only my training. The rest has already been organised, i need to complete both qualifications.

Kind regards

Reply
Dormac

Hello Sibusiso,

Thank you for your inquiry, but at the moment we are looking for Mech Engineering interns.

Kind regards

Dormac

Reply
Thuthuka Mlenzana

Current I have N5 in Mechanical engineering and I am looking for job at any company

Dormac

Hello Thuthuka,

Dormac unfortunately don’t have any vacancies at the moment.

Kind Regards

Dormac

Thuthuka Mlenzana

Hi, My name is Thuthuka Mlenzana I have N5 in Mechanical engineering currently waiting for my result for N6, I haven’t had much luck my jobs, do you have any jobs available?

Reply
Abongile

I have N1 completely so now I don’t have money to continue with my studies and if I can join this company I will do my best in my job

Reply
Keagan

Hello how do I go about applying for a mechanical position at dormac I studies 3 years have a level 3 certificate and 4 years experience in the battery industry worked as a head technician

Reply
odwa

I’m Mayibuthe Odwa who done electrical engineering n6 ,I am looking an apprentice from you company please Dormac

Reply
zothani

Hei I’m zothani Perfect Zulu looking for electrical apprenticeship .I have N3-N6 and I also completed my leanership at Toyota

Reply
Dormac

Hello Odwa,

Our apprenticeship program will only re-open next year May.

Please keep an eye on our website and Facebook page closer to the time.

Dormac

Reply
Shonisani

Dormac i have N2 and N3 mechanical looking for an apprenticeship please help and am still enrolling please.

Reply
Dormac

Hello Shonisani,

Our apprenticeship program will only re-open next year May.

Please keep an eye on our website and Facebook page closer to the time.

Dormac

Reply
Dormac

Hello Kubashen,

Please send your CV to carina@dormac.net to find out if you qualify for our apprenticeship program and when the next intake is.

Kind Regards

Dormac

Reply
Philisiwe

hi I’m Bonokuhle I’m 26 years old I have completed N5 of electrical engineering .I’m looking for an apprentice opportunity to ur company Dormac

is it possible for me to get apprentice in domac since I am 26year . coz I read the passage says u need 18to23

Reply
Dormac

Hello Bonokuhle,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
Sphiwe Jabu Nkabinde

Greetings
I have S4 mechanical engineering from university of technology.
I am looking for in-service training or to be a volunteer in maintenance n repairs under a huge company like Dormac.
I’m young, dedicated and passionate who is eager to grow and learn

Reply
Dormac

Hello Sphiwe,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards

Dormac

Reply
Nokuphiwe

I’m Nokuphiwe Qwabe 23 years old who done Electrical infrastructure construction level 4 looking an apprentice from your company please Dormae

Reply
Dormac

Hello Bokuphiwe,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Phezani

Hi I’m Phezani Mazeka a 27 old nd I have my N2 electrical engineering but I’d lov to get this opportunity apprentice this year

Reply
Mluleki

Hi , My name is Mluleki
i hv finished my N1-N6 electrical , i am looking for apprenticeship to finish my Deploma – i’m arround Durban

Reply
Anele

Hi I’m Anele Sawo ,I have N2-N4 in Mechanical engineering(Boilermaking) I need an apprentice help me please

Reply
mujaheed

Hi i am a semi skilled electrician. with more than ten years experience , currently doing project management at UCT .I do not fit the age criteria ,but i seek an opportunity to work for dormac.

Kindly ,can you put me in contact with the right department or persons , thank you

Reply
Slindile

Hi i am in Richardsbay i have N4 in mechanical i realy want an apprenticeship at Dormac im in ma late 20’s please help

Reply
Dormac

Hello Slindile,

Unfortunately our pprenticeship intake has now closed, but keep an eye on our website and Facebook page for the next intake.

Dormac

Reply
Tarquin masters

I am very much interested in applying for a apprenticeship with you guys asap will u b able to help me please

Reply
Dormac

Hello Tarquin,

Unfortunately our apprenticeship intake has closed, but keep an eye on our website and Facebook page for the next intake.

Kind Regards

Dormac

Reply
Mbave rudzani

Hi, am looking for a rigger job and i have submitted my cv at the gaye last week i wanna know wat happen so far, i have rigger ropesmen red seal section 26d, even assistant i would have it

Reply
Victor

Hiy I am semiskill welder but I am above 25 year can you refer me to relevent person who can help me and I finished Welding NQF level 3 at Elangeni tvet cllege on 11 April 2016

Reply
joseph pharo

Good day dormac i am a 22 year old male from durban
I have always wanted to work as a diver, and at first I wasn’t sure what work was possible.

I have always had an appetite for adventure, spending weekends away with my dad in the ocean catching crafish District climbing mountains to racing downhill mountain bikes and motorbikes. If there is a chance of an adrenaline rush, I’m interested.

I would describe myself as a calculated risk taker, I have a tendency to do a lot of research before I undertake any activity, whether it would be  commercial diving, or getting a new phone. 
The more I looked into and learned about the type of work divers do and the locations around the world where divers operate, the more it solidified my decision to become a commercial diver.
Welding is my passion and to become a underwater welder would be a dream come true
Right now I am doing structural welding work, but one day I would love to get my saturation ticket and have the opportunity to sat dive all over the world, meet divers from every corner and just keep learning and improving every day.
Kind regards

Reply
Dormac

Hello Joseph,

Our diving services are outsourced to Messrs Macdor Diving. You can contact them as follows:

Marius@dormac.net

Marius Claassen 0829245931
Wayne Elder 0823750448

Reply
fungai Muzhewe

Hie.lm studying Marine Engineering at Cape Peninsula University of Technology.The University asked me to get a letter from a shipping company in which the company will be allowing me to do my practicals with it during in the second year of my studies.May you kindly help me in any way
Thank you

Reply
Dormac

Hello Fungai,

Unfortunately Dormac does not help students out with their practicals, but please do send me your CV and I will speak to management.

Please send your CV to info@dormac.net

Thank you.

Reply
Ntokozo

hi I’am semi skilled welder, I did pipe welding( Argon, Àrc and CO2) at Samson School of welding at Durban.now I’ve been seeking for an opportunity at Dormac.

Reply
Dormac

Hello Ntokozo,

Please contact You can contact Dorman in Durban on email leslie@dormen.co.za and Tel 031 – 2053964 for all available positions at Dormac.

Kind Regards

Dormac

Reply
Zaheer Daniels

Hi im a Electrical Apprentice in my Second year for the CETA I am currently working at ADENCO ELECTRICAL ENGINEERING CONSTRUCTION. I was wonder if your company can give me opportunity to gain the industrial and marine electrical experience as an employee/student.

Reply
Dormac

Hello Zaheer,

We are currently doing interviews for the apprentice positions.

If you are based in Cape Town please email your CV today still to infor@dormac.net

Thank you.

Reply
Shuhayl

Hi the name is shuhayl an im a student doing my national certificate vocational , Engineering and Related Design majoring in Fitting and Turning i would like to apply for jobs or if possible an apprentice opportunity where do i apply?

Reply
Dormac

Hello Shuhayl,

Unfortunately our apprenticeship has closed for the time being, but keep your eye on our website and Facebook page for the next intake.
I am not sure if you are based in Cape Town or Durban, but you can contact our labour broker in Durban who is Dorman Engineering & Employment Services. You can contact them, they could maybe have vacancies in your level of expertise.

In Cape Town you can contact SFG Engineering Tel: 021 551 3585
E – Address: info@sfgengineering.co.za

Mail leslie@dormen.co.za
Tel 031 – 2053964

Kind Regards

Dormac

Reply
Dormac

Hello Shuhayl,

We are currently doing interviews for the apprentice positions.

If you are based in Cape Town please email your CV today still to infor@dormac.net

Thank you.

Dormac

Reply
AVRIL JAMES

HI IM AVRIL JAMES CAN YOU PLEAS ASSIST ME WITH THE APPRENTICESHIP IN BOILERMAKER AT THE COMPANY AS SOON AS POSSABLE ILL BE AVAILABLE ON YOUR REQUEST

YOUR SINCERE CANDIDATE
AVRIL JAMES

Reply
Thandeka Ndlovu

Hi… I’m almost a qualified electrician, already served a 4 years Apprinticeship, I have experience also, can you direct me to the right department for any available vacany. I’m in durban.. Thanks

Reply
Dormac

Hello Thandeka,

Our labour broker in Durban is Dorman Engineering & Employment Services. You can contact them, they could maybe have vacancies in your level of expertise.

Mail leslie@dormen.co.za
Tel 031 – 2053964

Kind Regards

Dormac

Reply
Polite Daluxolo Sibiya

hi i am polite sibiya and i have N4 electrical engineering,boilermaker5 and NQF Level 3 in welding so i like to do electrical apprenticeship with this company in order to be qualified artisan so what must I do to apply.

Reply
Dormac

Hello Polite,

We are doing interviews in Cape Town today and tomorrow. Please can you email your CV to info@dormac.net today still for your CV to be considered.

Thank you.

Kind Regards

Natascha

Reply
Cyril

Hi Dormac my name is Cyril I have a N2 NQF and would love to get the opportunity to work for the company and build a career with you guys but I’m over 25 please help

Reply
Khwezi

greetings Dormac admin my name is khwezi I have an pre-apprenticeship boilermaking certificate I obtained in 2014 at wilbat projects FET college, I would like to know when the next apprenticeship/skills training intake will take place because I’m interested in your apprenticeship program

Reply
Sandile

Hi i am in Richards Bay I have a Code 10 driver’s license and N2 in electrical engineering(instrumentation). i realy want an apprenticeship at Dormac and I’m in ma late 20’s please help

Reply
Amos Mahlare

Good morning Dormac I’m looking for learnership or apprenticeship ..I have obtained Nated course(N1-N5) in mechanical engineering currently doing N6 now I would love to be part of you guys and I’m 22 yrs nd I live at vereeniging also I Dnt mind to relocate at any time..please contact me on 072 659 4697 or email me any details on :amosmokwale@gmail.com
Thank you

Reply
Daniel

hlw my name is daniel morulane.im asking apprenticeship boilermaker i have certificate for boilermaker level 3.plz help me i want gain more exp about my career

Reply
Daniel

hlw my name is daniel.i have certificate for boilermaker level 3.im not qualified.im asking apprenticeship to gain more exp about my career.

Reply
Nydia Pieters

hi I have completed my N2 and N3..im moving on to my N4 and I want to apply fr an apprenticeship for next year… im doing electrical engineering and im located in durban…

Reply
Darren

Hey dormac I currently have a NQF level 4 in electrical engineering have to go for trade test still then I’ll have my qualification in electrical but I have previous work experience by the one company I worked in factory building panels(switchgears)and the other company I worked in the industrial sites such as substations laying of cabling etc,sports field laying of cables and repairs of lights working heights and doing wire ways etc and worked on dry doc running sleeve for electrical motors and connecting up so I do have experience but lots of place for more experience and to improve myself in the field so please can you help thanks in advance,Darren 071 225 5848 for any jobs open live in capetown

Reply
Mfundo

Hi Dormac my name is MFUNDO from Newcastle I have N3 boilermaking so now i need apractical experince to develop and uplift my knowledge and skills

Reply
Dormac

Hello Mfundo,

Our intake is now closed, but please keep an eye on our website and Facebook page.
In the meantime you can send your CV to carina@dormac.net

Please also contact our labour brokers for all available positions at Dormac.

Dormac

Reply
Thabo

Hey dormac I currently have NQF level4 for Boilermaker engineering.I studied at wilbat project in Durban and I also have a First Aid certificate please can you help me there my number Thabo 0745711426

Reply
Dormac

Hello Thabo,

Our intake is now closed, but please keep an eye on our website and Facebook page.
In the meantime you can send your CV to carina@dormac.net

Please also contact our labour brokers for all available positions at Dormac.

Dormac

Reply
Monde Blessing Mzimela

Hi my name is Monde Mzimela from Durban I was studying at Coastal TVET college (Swinton Campus) whereby I was doing Engineering and Related Design (Boilermaker) and 2014 I obtained a Nqf/Ncv level 4 certificate and I would like to apply for a job or if possible an apprenticeship, I really need something please.

Reply
Dormac

Hello Monde,

Our intake is now closed, but please keep an eye on our website and Facebook page.
In the meantime you can send your CV to carina@dormac.net

Please also contact our labour brokers for all available positions at Dormac.

Dormac

Reply
DieuMerci Dalvin

Good day!I’m a student at thekwini tvet college I just complete my N2-N6 in the field of electrical engineering. Now I am busy looking for an apprenticeship. I would like to know if there is any vacancy. Thanks

Reply
Dormac

Hello Dalvin,

Our intake is now closed, but please keep an eye on our website and Facebook page.
In the meantime you can send your CV to carina@dormac.net

Please also contact our labour brokers for all available positions at Dormac.

Dormac

Reply
sicelo

hi I’m Sicelo I’m in Durban and matriculated in 2015 Im interested in boiler making but don’t have experience yet during this year I have done debt collection, sales and marketing I need a learnership how can I get it ?

Reply
Nkosi

Hi I have NQF level 2 on mechanical fitter also semi skilled welder seeking for an employment ,Leanership and apprentice would u guys please help me out please

Reply
Lucky Jilana

Hi dormac I have N4 certificate in electrical and a very good learner I would like to be helped on anything that is available

Reply
Ntokozo

Hi,am Ntokozo from Newcastle would like to serves my training under your company i hv completed my N1,N2,N3,N4,N5,N6 of Boilermaker at Majuba TVET Collge so,how cn i get hold of apprenticeship

Reply
Ntokozo

Hi am Ntokozo from Newcastle at KwaZulu Natal the reason why i write this request again is that i have been trying to e-mail to Carina but,i got a respond that say my sen
t e-mail has fail so,i was wondering that may you could give me another e-mail if you do have one so,i can send my CV for the next intake or for future possibilities please

kind Regards

Mr NH Shabalala

Reply
Ntokozo

Hi,am Ntokozo from Newcastle would like to serves my training under your company i hv completed my N1,N2,N3,N4,N5,N6 of Boilermaker at Majuba TVET Collge so,how cn i get hold of apprenticeship Here’s my cell no:0711184128 and my e-mail is: mshengunh@gmail.com I would be delighted if you get back to me asap.

Reply
Dormac

Hello Ntokozo,

Our intake is now closed, but please do keep an eye on our website and Facebook page.

Dormac

Reply
Thulani

Hi,my Thulani Ngwenya am looking for apprenticeship of Boilermaker N1,N2,N3,N4 and N5 busy wth N6 at Majuba TVET College Newcastle so, I was wondering how can i be the next intake for available. So, i can send my CV for future possibilities.

I thank you

TN Ngwenya

Reply
Dormac

Hello Thulani,

Our intake has now closed, but please keep an eye on our website and Facebook page for the next opening.
You can email your CV to Carina in the meantime for her to keep on record.

Dormac

Reply
Dormac

Hello Jack,

Our intake has now closed, but please keep an eye on our website and Facebook page for the next opening.
You can email your CV to Carina in the meantime for her to keep on record.

Dormac

Reply
bongani

Hi dormac I’m Bongan I’ve got trade in welding ,I did apprentice for 3years so now I’m looking for job permanent or contract plz help if possible.

Reply
Lucky

Goodday
I am lucky Nguzane, i am looking for electrical apprenticeship or learnership. I have N3 electrical. How can i apply for it?

Reply
Storm da silva

I have finished my NCV level 4 in engineering boilermaking (3 year course) at College of Cape Town which is equivalent to N3. Will their be an opening in 2017 ? I am wanting g to start my Trade as soon as possible

Reply
melumzi

hi I am a student who jst finished his level4 fitting and turning lookng for apprenticeships job can u help me

Reply
mamaila sidney llaka

hi, my name is sidney and im a level 4 apprentice at imperial Toyota, i work on both petrol and diesel vehicles but registered as a lite vehicle machenic. i have N3 machenical engineering certificate and waiting for my level 1 and 3 motor machenic certificates from merseta. i would like to no if its possible for me to apply for a ship repairing post or apprenticeship at dormac when i get my qualifications. i am 24 years old

Reply
Daniel

Hlww i have certificate for boilermaker level 3.im asking apprenticeship to gain more exp plz i wnt to submit my cv

Reply
Nhlakanipho

I will be thankful if you would get back to me asap,cz i would rly love to serve my apprenticeship under your company bt,it wil be sad if you do not offer accommodation as i do not have any relative around Durban.also if the stipend is so,little to cover the cost of my living to Durban it really wil be sad

Reply
Dormac

Hi Nhlakanipho,

We unfortunately do not offer accommodation.

Please email your cv to carina@dormac.net to see if you qualify for our apprenticeship program.

Kind Regards
Dormac

Reply
Thulani

hi, am Thulani from Mpumalanga province I have N1,N2,N3,N4,N5,N6, of Boiler-Maker I would like to know that you offer accommodation for apprenticeship student if you don’t do you give them enough stipend to those who are not resident of Durban like other company in our province. Because our company in Mpumalanga they offer accommodation for apprenticeship student, if they wont they will give them enough money to rent for place and for transport as well I would be thankful if would get back to me asap??

Reply
Syabonga

hi i am Syabonga age 30 was working as an electrical assistant doing plant maintainance for 5years also got grade 12 and NCV NQF level 2 on Engineering Related and disign how can you help me

Reply
MAKGALE

I am 28 years old student who passed Engineering Fabrication NQF LEVEL 2 who needs apprentice or internship and I even passed ELECTRICAL INFRASTRUCTURE AND CONSTRUCTION Level 2.

Reply
Jongithemba

hellow ,
I have N2 on a boilermaking and i have 6 months now working as a Technical Assistance (boilermaker) , i have much interest on this learnership.

Reply
Jongithemba

hellow
I’m staying at cape town,I am looking for an apprenticeship \learnership to go futher wth my studies. I have N1 and N2 on boilermaking,now am working as a Technical assistance (boilermaker)

Reply
Noluthando

Hy my name is Noluthando Mzulwini n I’m 21 years old,I was doing mechanical engineering at Mangosuthu University of Technology,of Which currently I have completed S4 but I’m required to do inservice training so as to complete my National Diploma….I would like to apply for maybe apprenticeship or training at Dormac….I’ll be happy if I get help
Thank you

Reply
Asavela Siphunzi

Hi I’m Asavela and I’ve completed my N2 and will be rewriting two N3 subjects and the end of this trimester which is Mechanotechnology and drawings. I’m currently not attending and looking for a job placement. I’m willing to do good at the company.

Reply
Asavela Siphunzi

Hi I’m Asavela, I’m 24 years. I’ve completed N2 in boilermaker and I’m looking for an apprenticeship. Please help

Reply
Jongithemba

hellow
I’m at Cape Town and I wanna apply for apprenticeship on boilermaking but i dont know on which email address,may u please help me.I have N2 boilermaking.

Reply
Thabiso

Hi I’m Thabiso Nyakane 22 year’s of age, I have N2 in Boilermaking with:

Platers Theory : 66%
Engineering Sci : 55%
Maths. : 53%
Platers Drawing. : 59%

I’m also holding N3 with:
Maths. : 46%
Patting drawing : 67%
Mechanotechnology :76%
Engineering Sci : 61%

I have also done some training skills programme at Newcastle training centre which are Fabrication and Welding. I’m seeking an apprenticeship please help me.

Reply
mayibuthe odwa

Hi I am student who complete electrical engineering n1-6 now l’m interested to do an apprentice from you company Mr Dormac please

Reply
Jodi

Good day I wanted to know did the application for an apprenticeship in boilermaking and welding intake close already ?

Reply
Dormac

Hello Jodi,

Carina will be in contact if you qualify and if the program is full she will keep your details on file for the next intake.
Please contact her on carina@dormac.net if you have any questions.

Regards

Dormac

Reply
Storm

Good day Dormac I wanted to know has the application for Dormac apprenticeship in boilermaking closed?

Reply
Dormac

Hello Storm,

Carina will be in contact if you qualify and if the program is full she will keep your details on file for the next intake.
Please contact her on carina@dormac.net if you have any questions.

Regards

Dormac

Reply
Storm Da silva

I have gone for the interview at north link and Carina had interviewed me already as their were only 18 positions available so will I be notified if I get the apprenticeship or not?

Reply
Dormac

Hello Storm,

Yes, Carina will be in contact if you qualify.

Enjoy your day.

Dormac

Reply
Siphesihle Njilo

Hi I am Siphesihle Njilo a Matriculated Student of Maths and Science also Did my N1,N2,N3 and N4 but Failled Draughting only now I’m Doing my N5 in Mechanical Fitting I would like to Apply for the Apprenticship at Dormac, How can I do it?

Reply
Dormac

Hi I am a matricuted student of Maths and Science and also Did Mechanical Fitting N1,N2,N3 and N4 but only failed draughting wth 36% now I’m doing N5 it will be a great honor if I can get a chance to have a Apprentichip at your Company (Dormac)

Reply
Siphesihle Njilo

Hi.I am Siphesihle Njilo a matriculated student of maths and Science and also Did Mechanical Fitting
N1,N2,N3 and N4 but only failed draughting
wth 36% now I’m doing N5 it will be a great
honor if I can get a chance to have a
Apprentichip at your Company (Dormac)

Reply
Dormac

Hello Siphesihle,

Please email your documents to carina@dormac.net to find out if you quality.
She will be in contact if you do and let you know when the next intake opens.

Regards

Dormac

Reply
Sifiso

Hi, I am looking for fitter apprenticeship I have completed mechanical N2 doing N3 now.

Reply
Sifiso

Hi, I am Sifiso Mbatha looking for mechanical fitter apprenticeship I have completed N2 doing N3 but my age is above the required.

Reply
Denver

my name is Denver I have N2 mechanical engineering located in cape town looking for apprentice enrollment

Reply
Dormac

Hello Blessing,

Carina will be in touch if you qualify and when the next intake of students will be.

Dormac

Reply
O.J Tisane

M 26 years old with Matric maths n science bt not good,N2-N5 Electrical Eng, code C1 drivers licence,m busy with fitting n machinery N2 ,without drawing.I need a Learnership or APPRENTICESHIP as to be qualified Millwright/Electrician.Plz help me with funding,for training centre.

Reply
Sibusiso Shabane

Hello my name is Sibusiso Shabane and I was privileged and honored to be called up for an Apprenticeship interview on Tuesday (14). Due to a high level of panic I even forgot to ask when is the start date for the program and for how long to wait for a favorable reply. I believe my academic background has given me the tools and ability necessary to add value to the position and ultimately your organization. I really hope you’d give me this opportunity not only to empower my career development but to also give me the framework to utilize my full potential in your very prestigious and well respected company with a great reputation.

Reply
Sibusiso

Unfortunately Carina never got back to me, when is your next intake as I’m very eager to join the winning team Dormac

Reply
Dormac

Hello Sibusiso,

Carina and the collage will only get back to the candidate that qualified for the intake.
Our next intake is only in May 2018.

Regards
Dormac

Reply
Sthokozile Mncwango

Hi I would love to know when are the next intakes, l would love to apply for the Domac apprenticeships, Ive studied n2 and n3 fitting and turning and looking for a company to help me with an apprentice

Thank you for your time

Reply
Rose

Hi. I am an engineering student doing motor trade theory N2 bt at the moment i only passed motor and drawing. I was doing mechanical at high school and have only grade10 so i decided to go to college and do engineering. I like to know if i qualify for and apprentichip.

Reply
Dormac

Hello Rose,

Please email your CV to carina@dormac.net to find out if you qualify for our apprenticeship program and she will be in contact if you do qualify and when the next intake with take place.

Dormac

Reply
Lesedi

gritings m a 23 years old female n I have N1,2,3 in boiler making N4,5 in mechanical engeneering and I’m currently buzy with my N6.plz inform me regarding the apprenticeship or learnerships in your company.

Reply
Dormac

Hello Lesedi,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
vukile ngcobo

Hy my name is vukile ngcobo am 21years old, I am a weldind student at artisan development academy in durban.it is my first year. I will be glad if I get an apprenticeship in your company.

Reply
Dormac

Hello Vukile,

I hope that you are well.

Our next intake will only take place in May 2018.

Kind Regards

Dormac

Reply
Dormac

Hello Vukile,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
Mthetheleli

Hi. I am Mthetheleli Mpanza from empangeni. I have NCV level 4 in electrical infrastructure and construction and i also did in serve at Sompisi electrical construction for 1year from july 2015 to july 2016 bt am still not qualified. Is there any apprentice or a learnership you could offer me so that i’ll become a qualified artisan?

Reply
Dormac

Hello Mthetheleli,

I hope that you are well.

Our next intake will only take place in May 2018.

Kind Regards

Dormac

Reply
Dormac

Hello Mthetheleli,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
Le-Andry

Hi
I studied electrical engineering N1 and N2. Im currently looking for an apprenticeship.

Reply
Dormac

Hello Le-Andry,

I hope that you are well.

Our next intake will only take place in May 2018.

Kind Regards

Dormac

Reply
siza

I have grade11 maths n physics am 28yrs I just want to know if is there any apprenticeship or learnership that I qualify for am interested n am in capetown

Reply
NNxumaloNxumali

Hi i am Nxumalo Nomvula i completed my N6 in Electrical Engineering field and i am looking forward to get APPRENTICESHIP or internship to gain more experience and complete my N Dimplma
Please help me its been a long time now seeking for job i don’t find anything
And now i can even accept any opportunities either for general worker’s or whatever to just keep on living
Thank you

Reply
Dormac

Hello Nnxumalo,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
Nxumalo Nomvula

Hi i am Nxumalo Nomvula i did Electrical engineering from N2 to N6 and i have passed all my subjects i am looking forward to get APPRENTICESHIP or internship to gain more experience and complete my N Diploma currently i am not working still searching please if you have any opportunity you can also contact me on 0793476161 while i am waiting for job of my career i will also like to take any opportunity that come first because i am in need of a job thank you

Reply
Dormac

Hello Jodi,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
Jodi

Good day dormac
Will the selected group of applicants be notified that they are selected in this month? As Nated courses starts again start of this month

Reply
Dormac

Hello Jodi,

Carina will be in touch next year if you do qualify for our apprenticeship program, please note that our next intake will only take place in May 2018.

Kind Regards

Dormac

Reply
sphamandla

Hi, im sphamandla mabika. I jst finished my level 2,3 and 4 on fitting and turning. How do i apply for the apprenticeship?

Reply
Dormac

Hello Sphamandla,

I hope that you are well.

Our next intake will only take place in May 2018.

Kind Regards

Dormac

Reply
Dormac

Hello James,

Please note that our next intake will only take place in May 2018.

You can contact our labour brokers in the meantime for all available positions at Dormac.

Dorman in Durban:
Mail: leslie@dormen.co.za
Tel: 031 – 2053964
SFG in Cape Town:
Tel: 021 551 3585
Email: info@sfgengineering.co.za

Kind Regards

Dormac

Reply
Jodi

I’ve been interviewed in February by the HR of dormac in Cape Town. Will I be notified if I am chosen? Or has thee apprenticeship started already?

Reply
Dormac

Hello Jodi,

The collage will advise if you qualify for our apprenticeship program.

Kind Regards

Dormac

Reply
James

I’ve been interviewed by Carina in February in cape Town at northlink college for welding and boilermaking what do I do now?

Reply
Dormac

Hello James,

Northlink college will be in contact if you qualified, please contact them if you have any questions.

Dormac

Reply
Storm

Good day Dormac I wanted to know does Northlink college or Dormac choose who will be selected for thee apprenticeship?

Reply
Dormac

Hello Storm,

Northlink will advise if you were excepted for Dormac’s internship program that open in May 2018.

Dormac

Reply
Alex

my name is Alex ,and I’m looking for apprentice, I have technical matric with maths and technical drawing and n3/n4 mechanical engineering currently working as an assistant machine minder sheeter at Shave and Gibson

Reply
Dormac

Hello Alex,

Our apprenticeship program will only re-open next year May.

Please keep an eye on our website and Facebook page closer to the time.

Dormac

Reply
Ajith kumar.v

Is there any vacancy for Naval Architecture and offshore engineering??

Reply
Nonkosazana Moyeni

hlw my name is nonkosazana moyeni,21 years old,resides in cape town…i finished my matric in 2014 ,studied electrical ingineering N1-N4 in northlink college in 2016-2017,,nw i “m doing my N5…I”m seeking for an electrical apprentice or an inservice training.And i”m willing to relocate anywhere in south africa

Reply
Dormac

Hello Nonkosazana,

Our apprenticeship program will only re-open next year May.

Please keep an eye on our website and Facebook page closer to the time.

Dormac

Reply
Aseneck Willibrord

I am a coded welder seeking for a new job. I have Shipyard and storage Tank weld experience. Availability immediately
Skype ID : aseneck
WhatsApp +237652177435

Reply
mgwaba simphiwe

I GREET YOU DORMAC . IM LOOKING FOR AND KIND OF JOB RELATED TO BOLILER MAKING I CURRENTLY HAVE NQF LEVEL (boiler making) and N2-N3 ,IM AVAILABLE @ any time (0786345292) thank you so much

Reply
Mthandazo Gumpo

Hie,my name is Mthandazo Gumpo,am 21 years old from Zimbabwe but currently located in Western Cape,am in neex of Apprentice of Boilermaker, i have Mathematics, Science, English and History…if there is anyway i can qualify,please let me know…thank you.

Reply
Dormac

Hello Mthandazo,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards

Dormac

Reply
Ntokozo Magubane

good day

My name is Ntokozo and i am looking for entry level health and safety vacancy . i have SAMTRAC through NOSA .

Thank you

Reply
Hlengiwe Majola

Hi im hlengiwe majola im done my N2 andN3 in mechanical engeneering fitting and tunning so im looking for apprenticeshi can you please help me my number is 0783557534

Reply
Dormac

Hello Hlengiwe,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards

Dormac

Reply
Nitesh yadav

Hello
sir i am diploma mechanical engneering and CAD/CAM/CNC cource plz give me your job in dormac compani

Reply
Nqubeko

Hi…am Nqubeko 22 years old in need of an apprenticeship (boiler maker),I matriculated in 2014 with pure Maths and Science together with N1-N3 certificate and C1 driving licence please help Dormac (0799949988)

Reply
Dormac

Hello Nqubeko,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards

Dormac

Reply
Nhlanhla thomas

Hi my name is nhlanhla,25 yrs from Durban.i’m a semi skilled welder with arc&tig from Samson school of welding, with grade 12, BT would lyk to be a professional welder, can I get a chance to welder leanership to dormac with my qualification

Reply
Dormac

Hello Nhlanhla,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards

Dormac

Reply
Gerald

Hi May name is Gerald and I am currently employed as an Education Specialist In an Electrical Department at a TVET college at the Department of Higher education and Training. I have a N3 Electrical Certificate, a Teachers Qualification (NPDE), Electrical Trade test Red Seal Certificate and a Single Phase licence. I am 46 years old and is seeking to use my 25 year plus experience to manage and train young up and coming tradesman. I am a dedicated family man with a passion for people and is also and ordained minister in the local church. I live in Cape Town.

Reply
Dormac

Hello Gerald,

Unfortunately we do not have enough electrical apprentices to make this worth our while.

Kind Regards
Dormac

Reply
Siphamandla

Hi Dormac
I’m currently looking for a job as Boilermaking Assistant. I have two years working experience as a Assistant boilermaker. I will be happy once you reply back. From Cape Town. Contact no: 071 777 1757.

Reply
Dormac

Hello Siphamandla,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
Mpilo Sithole

Hi my name is Mpilo,I’m looking for Fitting and Turning Apprenticeship…do you have position available?

Reply
Dormac

Hello Mpilo,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
simphiwe

Good day my name is Simphiwe I am also looking for an apprenticeship for Fitting and Turning. I would to ask if we can not apply this year 2017 for 2018?

Reply
Dormac

Hello Simphiwe,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
Phile Simawo

Hi my name is Phile Simawo. I completed my S4 at Cape Peninsula University of Technology, please help I am looking for In-Service Training in order for me to graduate as a Mechanical Engineer

Reply
Dormac

Hello Phile,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
mbali

HI my name is mbali vilakazi i have completed my 3years NCV leve4 course in Electrical at Umfolozi College (Richtek campus) in 2015. My problem is i need a host employer company for an internship programme to further my skills. i would appreciate a lot if my request will be succsefull.

thank you

Reply
Dormac

Hello Mbali,

Our apprenticeship program will only re-open May 2018, please keep an eye on our website and Facebook page for information.

Kind Regards
Dormac

Reply
Pearl

Hi my name is Pearl .I have Ncv level 4 boilermaking certificate with practicals.i would like to know if do you help people like us to Dormac.If YES please HELP with any vacancy or apprenticeship.Thank you in advance

Reply
Dormac

Hello Pearl,

Thank you for your inquiry, at the moment we are only placing students from College of Cape Town for workplace experience – no apprenticeships.

Kind Regards
Dormac

Reply
Sakhumzi

Hi

I would like to know if you are in their learnership do they pay you weekly or monthly…? Like boilermake learnership.

Reply
Dormac

Hello Sakhumzi,

Please confirm your name and surname and if you are currently part of our apprenticeship program?

Thank you.

Reply
Slindokuhle duma

Hi my name is Slindokuhle Duma,i have finished N1-N6 electrical engineering but failed 1 subject in N6(Electrotechnics) i got 36% i would really appreciate it you mr Dormac can offer me an inserve, apprentiship or internship. THANK YOU

Reply
Nompilo Dlamini

Hi
I am a DUT student with S4 in Mechanical engineering, I was wondering if you have any inservice training available at the moment

Reply
Dormac

Hello Nompilo,

Unfortunately Dormac does not have any available positions at the moment.

Kind Regards

Dormac

Reply
Jabulani

Hi I’m currently doing welding level 3 at Coastal college. I wish to gain work experience at Dormac. Please help me if you still have space.

Reply
Dormac

Hello Jabulani,

Dormac unfortunately don’t have any apprenticeship openings at the moment.

Kind Regards

Dormac

Reply
Zinhle

I was wondering, will apprenticeship applications sent now in November 2017 be considered for the intake in May 2018?

Reply
Dormac

Hello Zinhle,

Applications open in May/June and you will be contacted if you qualify.

Dormac

Reply
Zola

Hi
I have N3 electrical engineering and I would like to apply for an apprenticeship, when can I apply?

Reply
Dormac

Hello Zola,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Shane Maroney

Hi, my name is Shane Maroney. I am looking for a boiler maker apprenticeship in Durban. I have my N3 and currently have 1 year experience as a MIG Welder and also familiar with boiler maker tools.

Reply
Dormac

Hello Shane,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Dormac

Hello Anele,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Thandanani

Hello. I am Thandanani Hlophe n stay in Durban. I have done n qualified as an artisan welder and hold a Trade certificate. I did my Apprenticeship at Transnet. I am currently looking for a welding job. Please help me

Reply
Jason Du Plooy

Hi my name is Jason, I completed my N2 boilermaking at Northlink. I would like to know if Dormac is taking in apprenticeship this year?

Reply
Dormac

Hello Jason,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Londiwe mchunu

I am Londiwe Mchunu would like to apply for apprenticeship in boilermaker I have level 4 ncv. I have done practicals using hand tools, power tools, rolling machine, bending machine, cutting touch, welding arc etc. It would be my dream if I would work with dormac company, I am willing to learner and grow within the company

Reply
Dormac

Hello Londiwe,

Our apprenticeship program re-opens in June this year.
Please contact me closer to the time for consideration.

Kind regards

Dormac

Reply
Orrin Van Kerwel

Hi i am a ncv level 4 boilermakering graduate for Northlink also did my phases in boilermaking i am interested in a apprenticeship at your company , which i came to know as the ideal place to gain experience

Reply
Dormac

Hello Orrin,

Our apprenticeship program will only re-open in June this year.
You can forward your CV to natascha@dormac.net for consideration closer to the time.

Thank you.

Kind Regards

Dormac

Reply
Wonder

Hello..
I require inservice training to complete my diploma.. Are there any opportunities available for electrical engineering inserv..

Reply
Nkosinathi

Hello my name is Nkosinathi
I’m currently doing may second year of which is my last year in Power electrical engineering, I would like to do inservece training next year so is there any application that I can do this year…Please help…

Reply
Sandile

I have s4 in electrical engineering power systems and I’m looking for in-service training in electrical engineering so now I can able to be a qualified electrical technician

Reply
Zubair Brenner

Hi there
My name’s Zubair Brenner I would like to apply for an apprenticeship I have my n2 in fitting and turning and I have basic hand skills . I’m open to any type of machining and or engineering fitter

Kind regards
Mr B

Reply
Ashwin Thomas

Good day
My name is Ashwin Thomas,I am a semi skilled boilermaker/welder.I want to gsin more experience in my field of study and would love to work at your company.How can I apply for an apprenticeship?

Reply
Fabian

Hi

My name is Fabian, I completed my N6 mechanical and ND: Mechanical Engineering . I currently seeking to gain more work experience in the mechanical engineering field.

Regards

Reply
Lungisani ntuli

Hi my name is lungisani Ntuli ,i am currently under the government program (WAR ON LEAKS ) I am doing my phase two fitter and Turner at shukela training centre.i am under no company.i would like to ask for an opportunity to do my inservice training with dormac when i have finish my phase two by july 2018.

Reply
Dormac

Hello Lungisani,

Thank you very much for your email.

You can send your CV to carina@dormac.net for consideration, but at the moment we are not taking in fitters & turners as our current students are here for two years.

Kind Regards

Dormac

Reply
lisa dickens

hi my name is Lisa Dickens, I wanted to know when and how to apply for apprenticeship. I have a N3 electrical engineering, Quality assurance Experience and production technology certificate

Reply
Jabulani

Hi my name is Jabulani Mkhize . I was doing training for welding at Coastal College and I have finished. I only got level 2 and 3. I wish to gain more experience in welding at Dormac because they do big jobs. I can be very happy to do an apprenticeship at Dormac

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *